TSI Instruments SidePak AM520 - Measurement Units; Battery Units; Screen Save Delay

Chapter 3
30
Measurement Units
1. Select SETTINGS from the MAIN
MENU with the ▲ ▼ keys and
press  (ENTER).
2. Under SETTINGS menu, select
MEAS UNITS with the ▲ ▼ keys and
press  (ENTER).
3. Use the ▲ ▼ keys to select mg/m
3
or µg/m
3
. Press  (ENTER) to
accept. The format selected will be displayed on all screens, then
return to the SETTINGS menu.
Battery Units
Battery life remaining can be displayed in
minutes or in hours and minutes.
1. Select SETTINGS from the MAIN
MENU with the ▲ ▼ keys and press
 (ENTER).
2. Under SETTINGS menu, select Battery Units with the ▲ ▼ keys
and press  (ENTER).
3. Use the ▲ ▼ keys to select Minutes or Hour+Min and press
 (ENTER). The format selected will be displayed on all screens,
then return to the SETTINGS menu.
Screen Save Delay
The OLED screen display can be set to
go blank after a period of time to
conserve battery life. To set the delay:
1. Select SETTINGS from the MAIN
MENU with the ▲ ▼ keys and press
 (ENTER).
2. Under SETTINGS menu, select Screen Save Delay with the ▲
▼ keys and press  (ENTER).
3. Use the ▲ ▼ keys to select the delay. Options are 10, 15, 20, 30
or 60 seconds.
4. Press  (ENTER). The delay selected takes effect immediately,
and returns to the SETTINGS menu.