TSI Instruments SidePak AM520 - Post-Sampling Data Reporting and Graphing

Operation
39
To select an alarm and an alarm action:
1. Select ALARMS from the MAIN MENU with the ▲ ▼ keys and
press  (ENTER).
The ALARMS menu has the following options:
• Mass Alarm
• Mass STEL
• Response Alarm
• Response STEL
• LEDs
• Audible
• Screen
• Ringback
2. Select Mass Alarm, Mass STEL, Response Alarm, or
Response STEL with the ▲ ▼ keys and press  (ENTER).
3. Select the setting you want to use from the list of available values
with the ▲ ▼ keys and press  (ENTER).
4. Use the ▲ ▼ keys to select an alarm indicator: LEDs, Audible,
Screen or Ringback and press  (ENTER).
5. Turn the indicator ON or OFF for LEDs, Audible, and Screen.
6. Select a Ringback delay time from the RINGBACK menu.
Post-Sampling Data Reporting and Graphing
After collecting and logging data, all tests and data can be
downloaded to a personal computer via the supplied USB cable. For
data report generation and graphing, use the TSI
®
TrakPro™ v5.x.x
Data Analysis Software (TSI
®
P/N 7003173).
With the TrakPro™ software, you can also program the internal
settings of the AM520/AM520i units for performing future dust
monitoring studies. See the product information of the TSI
®
TrakPro™
software for all the features and capabilities that enhance the use of
your SidePak™ AM520/AM520i Personal Aerosol Monitor.
TrakPro™ software is available for download from the TSI
®
website
at: https://www.tsi.com/support/tsi-software-and-firmware/.