Why is my Tsun Measuring Instruments showing AC Overvoltage?
The AC Overvoltage error on your Tsun Measuring Instruments might be due to abnormal power grid fluctuations. If this is the case, the system should automatically recover after a while. If the issue persists, examine the protection settings.
Why does my Tsun Inverter show PV1VoltLow_Fault?
The 'PV1VoltLow_Fault' warning on your Tsun Inverter often appears in the morning or at dusk. If this warning appears during the daytime, check the connection of the PV module.
How to fix Tsun G3 PV1VoltOver_Fault?
To address a 'PV1VoltOver_Fault' on your Tsun Inverter, check the voltage of the PV module. Ensure that the voltage is below the maximum DC input voltage of the microinverter.
What to do if my Tsun G3 shows 'No Utility'?
If your Tsun Inverter displays a 'No Utility' error, it means the AC power grid is disconnected. Check the AC power grid to ensure it is functioning correctly. If the fault persists, contact Tsun service.
What to do if my Tsun G3 Inverter displays a GFDI_Fault?
If your Tsun Inverter is showing a 'GFDI_Fault', this indicates an internal fault. Disconnect the AC power to restart the microinverter.
Why does my Tsun G3 show OverTemp?
If your Tsun Inverter is showing an 'OverTemp' warning, it might not have good heat dissipation. Review the installation to ensure proper ventilation around the microinverter.
What to do if Tsun Inverter shows GridVoltOverRating?
If your Tsun Inverter displays a 'GridVoltOverRating' fault, it means the AC power grid is experiencing abnormal voltage. This issue should resolve itself when the AC power grid returns to normal. However, continuous faults may indicate a persistent problem.
What to do if my Tsun Inverter has no utility?
If your Tsun Inverter shows a 'No Utility' fault, the AC power grid might be disconnected. Check the AC power grid to ensure it is working. If the problem persists, it could indicate a more serious issue.
What to do if Tsun Inverter displays PV1VoltOver_Fault?
If your Tsun Inverter displays PV1VoltOver_Fault, check the voltage of the PV module to ensure it's below the maximum DC input voltage of the micro inverter. If the fault persists, contact Tsun service.
What to do if Tsun G3 Inverter shows PV1VoltLow_Fault?
If your Tsun Inverter displays PV1VoltLow_Fault, especially in the morning or at dusk, it is usually normal. However, if this warning appears during the daytime, check the connection of the PV module. If the fault persists, contact Tsun service.
General| Output Power | 3000W |
|---|---|
| Peak Power | 6000W |
| Frequency | 50Hz/60Hz |
| Cooling | Fan Cooling |
| Output Voltage | 220/230/240V AC |
| Protection Features | Overload, Overheat, Short Circuit |
To Next Page
