What to do if Tsun G3 shows PV1CurrOver_Fault?
If your Tsun Inverter displays PV1CurrOver_Fault, disconnect the AC power to restart the micro inverter. If the fault appears continuously, please contact the TSUN service.
How to fix OverTemp on Tsun Inverter?
If your Tsun Inverter is showing an OverTemp error, check the installation to ensure it has good heat dissipation. If the fault continues, contact Tsun service.
What to do if my Tsun G3 displays GFDI_Fault?
If your Tsun Inverter displays a GFDI_Fault, disconnect the AC power to restart the micro inverter. This fault indicates an internal issue. If the problem persists, contact Tsun service.
What to do if my Tsun G3 displays Fault 01 - 08?
If your Tsun Inverter shows Fault 01 - 08, disconnect the AC power to restart the micro inverter. If the fault appears continuously, please contact the TSUN service.
Why does my Tsun Inverter show GridVoltOverRating?
The GridVoltOverRating fault on your Tsun Inverter indicates an abnormality in the AC power grid. This issue should resolve itself when the AC power grid returns to normal. However, if the fault continues, contact Tsun service.
General| Output Power | 3000W |
|---|---|
| Peak Power | 6000W |
| Frequency | 50Hz/60Hz |
| Cooling | Fan Cooling |
| Output Voltage | 220/230/240V AC |
| Protection Features | Overload, Overheat, Short Circuit |
To Next Page
