To Next Page
A
amber12Sep 1, 2025
How to resolve ERR35 on Tufner T903?
- PpauladeanSep 1, 2025
If your Tufner Accessories displays 'ERR35', the printing format is wrong in normal weighing mode. To fix this, set the printing format to Setting “1”.
How to resolve ERR35 on Tufner T903?
If your Tufner Accessories displays 'ERR35', the printing format is wrong in normal weighing mode. To fix this, set the printing format to Setting “1”.
How to fix ERR30 on Tufner T903 Accessories?
If your Tufner Accessories displays 'ERR30', it means the printing format is wrong in accumulative weighing mode. Set the printing format to setting “2”.
Why am I getting ERR15 on my Tufner T903 Accessories?
If your Tufner Accessories displays 'ERR15', it means the scale wasn’t stable when Tared. Tare the scale once the load is stable.
What causes ERR34 on Tufner Accessories?
If your Tufner Accessories shows 'ERR34', it indicates a printing error in normal weighing mode. Wait for the load to be stable before printing.
What does ERR10 mean on my Tufner T903?
If your Tufner Accessories displays 'ERR10', it indicates that the scale was not stable when zeroed. Ensure the scale is stable before zeroing.
Why is my Tufner T903 Accessories showing nnnnnnn?
If your Tufner Accessories display 'nnnnnnn', the possible causes are: calibration is no good (make sure the scale is level), wrong connection with load cell (check load cell connection), or a quality problem with the load cell (check load cell input and output resistance). You can also see Q&A section.
What to do if Tufner T903 displays ERR32?
If your Tufner Accessories shows 'ERR32', it means you are either weighing over the maximum capacity or attempted to print while the scale was unstable. To resolve this, reduce the weight on the scale or print after the scale has stabilized.
General| Brand | Tufner |
|---|---|
| Model | T903 |
| Category | Accessories |
| Language | English |