Quick troubleshooting Guide
TUN-QTSG-0519-EN_A3
For power inverter models M1500 – M2000 – M2500 – M3000
ANNEX 3
Tel.: 450.649.2470 / 1.877.964.2582 Fax.: 1.888.855.9834
TUNDRAINVERTERS.COM
INSTALLATION – UNDER THE CAB 3-3
CABLE ROUTING (cont’d)
2. You must make a “loop” to compensate for
suspension movement in the cab. This loop must be
located near the battery box.
If the loop is made at the rear of
the cab, it must be larger so as to
accommodate the greater
amplitude of cab suspension
movement at the rear.
3. Insert the cables into one of the rear openings of
the battery box.
4. Secure the power inverter cables to the
surrounding cables with plastic ties to protect
them from vibration..
Do not hesitate to use several plastic fasteners to distribute the weight of the cables and
to limit the stress on each plastic tie.
2
3
4
To Next Page
Loading...
