Quick troubleshooting Guide
TUN-QTSG-0519-EN_A3
For power inverter models M1500 – M2000 – M2500 – M3000
ANNEX 3
Tel.: 450.649.2470 / 1.877.964.2582 Fax.: 1.888.855.9834
TUNDRAINVERTERS.COM
GENERAL INFORMATION 1-1
FOREWORD
This manual is designed to be used primarily by trained mechanics in a properly equipped shop. However, it
contains enough information to allow the owner to perform their own basic installation. A basic knowledge of
mechanics and electricity, and the proper use of tools and workshop procedures is required in order to
adequately and safely perform all tasks. If the owner has insufficient experience or doubts his ability to do the
work, installation should only be carried out by a qualified technician.
For a successful installation, and to avoid costly mistakes, be sure to read the instructions thoroughly so as to
familiarize yourself with the procedures before starting the work. Make sure your work area is clean. Always use
the specified tools. Using substitutes may adversely affect the results and the safety of the user.
SAFETY FIRST
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE OR INJURY, PLEASE TAKE NOTE OF THE
FOLLOWING RECOMMENDATIONS:
1. A power inverter is an energy conversion device that MUST be taken seriously and that MUST be
installed with care.
2. All steps in this manual should be carefully understood and applied for your own safety and that of
others.
3. Do not play with electricity if you do not have the knowledge and the skills required. The electrical
current at the output of this inverter is similar to what the utilities provide and is therefore extremely
dangerous if not handled properly. It can cause fire, damage, serious injury, and even death.
To Next Page
Loading...
