Quick troubleshooting Guide
TUN-QTSG-0519-EN_A3
For power inverter models M1500 – M2000 – M2500 – M3000
ANNEX 3
Tel.: 450.649.2470 / 1.877.964.2582 Fax.: 1.888.855.9834
TUNDRAINVERTERS.COM
INSTALLATION – INSIDE THE CAB 2-12
GROUNDING VERIFICATION
Grounding a mobile power inverter is purely theoretical and has
nothing to do with conventional grounding. Grounding a mobile
power inverter involves connecting its housing to the vehicle
chassis so that the power inverter can more quickly detect any
trace of voltage leakage resulting from a damaged 120 V device
or extension, or from a positive wire coming into contact with the
power inverter or with the vehicle chassis.
If the power inverter is attached to a metal
plate in the cabin, its grounding is probably
adequate. We recommend checking it by
following these steps:
1. Using a test lamp, connect a 12 V power source to the grounding bolt on the back panel of the power
inverter. If the lamp comes on, the grounding is adequate.
To Next Page
Loading...
