ITEM DESCRIPTION
PART NUMBER FIGURE NUMBER (PAGES 65-78)
Shim, 0.030 NGC-1169-1 32
Shim, 0.045 NGC-1169-2 32
Shim, Door Latch NGC-1132 35
Shim Tool, 0.030 NGC-1344 32
Shim Tool, 0.060 NGC-1340 32
Shunt Plate, Door NGC-3021 35
Smart Card, Blank 100508 17
Smart Card, Programmed (call TurboChef for Part Numbers) Varied 17
Spacer, Aluminum, 1/2” 101954 17
Standoff, #8-32 F/F x 1” 101912 31
Standoff, #8-32, F/F x 1”, 5/16 Diameter 101914 33, 34
Standoff, #8-32, M/F x 5/16”, 1/4 Diameter 101915 33, 34
Stone, Baking, Fiber-Reinforced NGC-3063 46
Stone, Baking, Glazed, Clear NGC-3038 46, 47
Stone, Baking, Unglazed NGC-3037 46
Support, Frame NGC-1047 22
Switch, Door, Assembly NGC-3033 29, 32
Switch, Door (Component) 102012 29, 30, 31, 32, 33, 34
Tape, Aluminum 102698 35
Thermocouple, Electrical Compartment (EC) 700-1199 None
Thermocouple, Cook Cavity (CC) NGC-1140 None
Thermostat, High-Limit 102075 38
Thermostat, Magnetron 102070 21
Toggle, Latch NGC-1073 30
Transformer, Filament (USA, Korea) NGC-3061-1 20
Transformer, Filament (Europe, Asia-Pacific, Latin America) NGC-3061-2 20
Transformer, Filament (Japan) NGC-3061-3 20
Transformer, HV (USA, Latin America, Korea) NGC-3062-1 20
Transformer, HV (Europe, Asia-Pacific) NGC-3062-2 20
Transformer, HV (Japan) NGC-3062-3 20
Washer, Flat, #10 102140 26
Washer, Shim 102449 39
Washer, Split Lock, #10 102350 26
Wave Guide, Front NGC-3016 20, 22
Wave Guide, Rear NGC-3017 20, 22
Wire, Magnetron 100186 21
82
COMPREHENSIVE PART LIST
To Next Page
Loading...
Need help?
General
