Setting
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2023/06 | 15
9 Setting
The following parameters can be set via teaching-in:
Parameter Description
Start point The start of the analog measuring range is defined according
to the effective direction.
End point The end of the analog measuring range is defined according
to the effective direction.
Effective direction The effective direction of the encoder is set clockwise (CW) or
counterclockwise (CCW).
Factory setting Resets the sensor to factory settings.
To Next Page
Loading...
