Troubleshooting
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2023/06 | 18
10 Troubleshooting
The strength of the resonance coupling is indicated by an LED. Any faults are indicated via the
LEDs.
If the device does not function as expected, first check whether ambient interference is present.
If there is no ambient interference present, check the connections of the device for faults.
If there are no faults, there is a device malfunction. In this case, decommission the device and
replace it with a new device of the same type.
To Next Page
Loading...
