turck Ri360P1-DSU35TC-ELi-Exi - 4 Product Description; Device Overview; Indication Elements; Operating Elements

Product description
Properties and characteristics
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2023/06 | 6
4 Product description
The inductive angle sensors of the RI360…DSU35TC… product series measure angular move-
ments up to 360°. The sensor and the positioning element are fully potted and designed as two
independent and fully sealed units with protection to IP68 and IP69K, which work together
without contact. Due to their functional principle, the sensors are immune to electromagnetic
interference. The positioning elements with the optionally available adapter sleeves can be
mounted on ferritic and non-ferritic shafts with a diameter of up to 30mm. Mounting kits are
available for mounting on larger rotary actuators.
The devices feature an analog output with a teach-in function. Teaching-in is carried out via a
switch in the terminal chamber. An output signal between 4 and 20mA is output via the angu-
lar position of the positioning element.
4.1 Device overview
35.4
76
11.5
M20 x 1.5
ø 40.5
30
60
23
8
ø 5.4 (4 x)
LED
4.1.1 Indication elements
The devices have a green operating voltage LED and a yellow status LED.
4.1.2 Operating elements
Start and end points for analog signals can be set via the teach button installed in the terminal
chamber and the effective direction of the encoder can be changed.
4.2 Properties and characteristics
n Rectangular, housing DSU35
n Plastic, PP-GF30
n Detection of angular positions from 0 to 360°
n Measuring range can be adjusted via teach button in the terminal chamber
n Analog output, 4…20mA
n Immune to electromagnetic interference
n 14…30VDC