turck Ri360P1-DSU35TC-ELi-Exi - Setting Via the Easy-Teach Function

Setting
Setting via the Easy-Teach function
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2023/06 | 16
9.1 Setting via the Easy-Teach function
Teaching-in is carried out via the teach button in the terminal chamber. To actuate the teach
button, the housing must be removed.
During normal operation, the operating voltage LED lights up green. After successful teaching-
in, the operating voltage LED flashes green briefly.
Dismantling the housing
 Loosen the screws on the housing.
 Remove the housing part above the terminal chamber.
Fig.6: Removing the housing part
Setting options for the Easy-Teach function
2.
1.
3.
Fig.7: Carrying out the teaching-in procedure