turck Ri360P1-DSU35TC-ELi-Exi - Technical Accessories

Product description
Technical accessories
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V01.00 | 2023/06 | 8
4.5 Technical accessories
Dimension drawing Type ID Description
34
ø 40.5
P1-RI-DSU35 6901086 Positioning element for inductive angle sensors DSU35
for rotary actuators; mounting on connection shaft with
countersunk screw M6×25
34
ø 40.5ø 15.88
20.5
P4-RI-DSU35 100002204 Positioning element for inductive angle sensors DSU35
for rotary actuators;
mounting on connection shaft (shaft extension) 5/8″
with set screw
ø 40
80 (130)
45
Sensor
30
20
10
ø max. 65
ø max. 30
BTS-DSU35-Z01 6900229 Mounting kit for dual sensors for larger rotary actuators;
Ø spacer plate and snap ring: max. 65mm;
hole pattern on flange: 30×80 mm (30×130mm);
connection shaft (shaft extension) height:
20mm/Ø max. 30mm
ø 40
80 (130)
55
40
20
ø max. 65
Sensor
BTS-DSU35-Z02 6900230 Mounting kit for dual sensors for larger rotary actuators;
Ø spacer plate and snap ring: max. 65mm;
hole pattern on flange: 30×80mm (30×130mm);
connection shaft (shaft extension) height:
20mm/Ø max. 45mm
ø 40
130
65
Sensor
50
30
ø max. 110
ø max. 70
BTS-DSU35-Z03 6900231 Mounting kit for dual sensors for larger rotary actuators;
Ø spacer plate and snap ring: max. 110mm;
hole pattern on flange: 30×130mm;
connection shaft (shaft extension) height:
30mm/Ø max. 70mm
ø 40
80 (130)
45
Sensor
10
ø max. 65
30
ø max. 30
BTS-DSU35-Z07 6900403 Mounting kit for dual sensors for larger rotary actuators;
Ø spacer plate and snap ring: max. 110mm;
hole pattern on flange: 30×130mm;
connection shaft (shaft extension) height:
50mm/Ø max. 75mm