To Next PageTo Next PageWhat to do if ‘Low Pres’ is displayed on Tuttnauer 3170?
If your Tuttnauer Laboratory Equipment displays ‘Low Pres’, check the door for any leakage and replace the door gasket if needed. Also, make sure that no instrument is touching the electrode by sticking out through the basket holes. Rearrange the instruments in the basket and restart the cycle.
Why can't I change programs and the FAIL light remains on Tuttnauer 3170?
If you cannot change programs and the FAIL light remains on for your Tuttnauer Laboratory Equipment, it might be due to a problem with the printer paper. Turn off the main switch. Remove the printer paper. Then, turn the main switch back on. The cycle should return to the previous stage. Insert the printer paper, making sure it is correctly positioned.
How to troubleshoot a Tuttnauer Laboratory Equipment that is not responding?
If the Tuttnauer Laboratory Equipment is not responding, first, check the power source to ensure it meets the required specifications. Then, verify that the main switch is in the ‘On’ position. Ensure the power cord is securely connected to both the machine and the mains. Check the reset button on the cut-out thermostat and reset it if necessary. Finally, check the circuit breaker and reactivate it if it has tripped.
General| Brand | Tuttnauer |
|---|---|
| Model | 3170 |
| Category | Laboratory Equipment |
| Language | English |
