Why are wraps burned after using Tuttnauer 3140E Laboratory Equipment?
To address wraps coming out burned from your Tuttnauer Laboratory Equipment, check if the water sensor is dirty. Also, verify that the wall outlet voltage is not too high and ensure items are not touching the chamber walls or bottom. Load the autoclave according to the instructions.
What to do when my Tuttnauer Laboratory Equipment displays ‘High Temp’?
If your Tuttnauer Laboratory Equipment displays ‘High Temp’, clean the air jet and check for proper voltage at the wall outlet.
What does ‘Low Heat’ mean on my Tuttnauer 3140E Laboratory Equipment?
If the message ‘Low Heat’ is displayed during heat up on your Tuttnauer Laboratory Equipment, it indicates a bad temperature sensor. If heating elements are remaining on instead of cycling on and off, call for a technician.
How to clean a very dirty chamber in my Tuttnauer 3140E?
If the chamber of your Tuttnauer Laboratory Equipment is very dirty, use Chamber Brite ™ to clean the autoclave; very dirty machines may require two cleanings.
Why are instruments rusting in my Tuttnauer Laboratory Equipment?
If instruments are rusting after sterilization in your Tuttnauer Laboratory Equipment, first determine if it's true rust by using a pencil eraser to remove the brown spot. If there is no pitting, the instrument is just dirty. Use distilled water for sterilizing and ensure dissimilar metals are not in contact with each other.
Why does Tuttnauer 3140E Laboratory Equipment printer feed paper constantly?
If the printer on your Tuttnauer Laboratory Equipment gives paper feeds all the time when the machine is switched on, make sure the ‘feed button’ on the printer is not stuck.
What to do if the keyboard of my Tuttnauer 3140E Laboratory Equipment does not respond?
If the keyboard of your Tuttnauer Laboratory Equipment does not respond, press the STOP key for 2 seconds to abort any program that may still be running.
How to troubleshoot a Tuttnauer 3140E system that shows no response when turned on?
If your Tuttnauer Laboratory Equipment does not respond when you turn it on, try the following: First, check and fix all connections. If the issue persists, replace any faulty cables, connectors, or the power switch.
Why is my Tuttnauer Laboratory Equipment making a loud noise?
If you hear a loud noise coming from the reservoir of your Tuttnauer Laboratory Equipment, the sterilization temperature may be set too high. The maximum setting is 274ºF (134ºC).
How to clean a very dirty Tuttnauer 3140E Laboratory Equipment chamber?
To clean a very dirty chamber in your Tuttnauer Laboratory Equipment, use Chamber Brite ™. Very dirty machines may require two cleanings.
Details the manufacturer's warranty terms for components, labor, and chamber.
Procedures for activating the warranty and important statement of terms.
Provides detailed electrical specifications, including circuit breakers and fuses.
Specifies acceptable physical characteristics and contaminant levels for autoclave water.
Explains the meaning and function of various indicator lights on the control panel.
Details the program keys and other function keys on the control panel.
Description of the control panel screen layout and displayed information.
Lists and explains system messages and associated safety measures for user guidance.
Details sterilization parameters and operational sequence for unwrapped items.
Details sterilization parameters and operational sequence for wrapped items and porous loads.
Details sterilization parameters and operational sequence for glassware.
Guidance on electrical connections, safety, and initial setup for different models.
Instructions for setting up and verifying the automatic water filling system.
Guidelines for safely loading and unloading materials into the autoclave chamber.
Instructions on correctly filling the autoclave's water reservoir with distilled water.
Guidelines for cleaning, drying, and packaging items for effective sterilization.
Outlines daily, weekly, and periodic maintenance tasks to ensure optimal performance.
Specific daily cleaning and inspection procedures for the autoclave.
Specific weekly cleaning and descaling procedures for the autoclave.
Lists monthly and periodic checks, cleaning, and part replacements.
Solutions for when spore tests or indicator strips do not change color.
General| Brand | Tuttnauer |
|---|---|
| Model | 3140E |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
