What does ‘Low Heat’ mean on my Tuttnauer 3140E Laboratory Equipment?
If the message ‘Low Heat’ is displayed during heat up on your Tuttnauer Laboratory Equipment, it indicates a bad temperature sensor. If heating elements are remaining on instead of cycling on and off, call for a technician.
How to clean a very dirty chamber in my Tuttnauer 3140E?
If the chamber of your Tuttnauer Laboratory Equipment is very dirty, use Chamber Brite ™ to clean the autoclave; very dirty machines may require two cleanings.
What to do if Tuttnauer 3140E Laboratory Equipment process fails during heating stage with a HIGH TEMP message?
If your Tuttnauer Laboratory Equipment process fails while initiating the heating stage and displays a HIGH TEMP message, try changing the setting of the thermostat.
How to troubleshoot Tuttnauer Laboratory Equipment machine not responding?
If your Tuttnauer Laboratory Equipment machine isn't responding, verify that the main switch is in the ‘On’ position, the power cord is properly connected to both the machine and the mains, and the circuit breaker hasn't tripped. Also, check the reset button on the cut-out thermostat.
What should I do if my Tuttnauer Laboratory Equipment shows ‘Low Pres’?
If the 'Low Pres' message is displayed on your Tuttnauer Laboratory Equipment, clean the water level electrode inside the vessel. Also, ensure the door is fully closed, the door gasket is properly seated, and there is no steam leakage. Check the leveling of the machine.
How to fix ‘High Pres’ error on Tuttnauer Laboratory Equipment?
If the 'High Pres' message appears on your Tuttnauer Laboratory Equipment, the air jet might be clogged; clean it. It could also mean that the heating elements are continuously on, or the temperature sensor is faulty. In these cases, contact a technician.
How to unclog the drain on Tuttnauer Laboratory Equipment?
If the drain of your Tuttnauer Laboratory Equipment is clogged: 1. Open the drain by turning it counterclockwise and place a heavy object over the reservoir cover. 2. Blow compressed air into the drain to force debris back into the reservoir, then clean out the reservoir. 3. Alternatively, disassemble the drain valve, clean it, and blow out the line. Reassemble the valve, ensuring the large 'O' ring is properly seated.
What should I do if my Tuttnauer 3140E Laboratory Equipment displays ‘High Pres’?
If your Tuttnauer Laboratory Equipment displays ‘High Pres’, clean the air jet. Ensure the sterilization time and temperature are set correctly; if unsure, use the default settings. Also, make sure the autoclave is not too heavily loaded.
What to do if my Tuttnauer 3140E Laboratory Equipment is not responding?
If your Tuttnauer Laboratory Equipment is not responding, ensure the main switch is in the ‘On’ position. Also, verify the power cord is properly connected to both the machine and the mains. Check the reset button on the cut-out thermostat and make sure the circuit breaker hasn't tripped; lift the circuit breaker lever if it has.
Why is my Tuttnauer 3140E Laboratory Equipment leaking at the door?
If your Tuttnauer Laboratory Equipment is leaking at the door, ensure the door is tightened enough and the door gasket is sealing the chamber. If necessary, replace the door gasket.
Details the manufacturer's warranty terms for components, labor, and chamber.
Procedures for activating the warranty and important statement of terms.
Provides detailed electrical specifications, including circuit breakers and fuses.
Specifies acceptable physical characteristics and contaminant levels for autoclave water.
Explains the meaning and function of various indicator lights on the control panel.
Details the program keys and other function keys on the control panel.
Description of the control panel screen layout and displayed information.
Lists and explains system messages and associated safety measures for user guidance.
Details sterilization parameters and operational sequence for unwrapped items.
Details sterilization parameters and operational sequence for wrapped items and porous loads.
Details sterilization parameters and operational sequence for glassware.
Guidance on electrical connections, safety, and initial setup for different models.
Instructions for setting up and verifying the automatic water filling system.
Guidelines for safely loading and unloading materials into the autoclave chamber.
Instructions on correctly filling the autoclave's water reservoir with distilled water.
Guidelines for cleaning, drying, and packaging items for effective sterilization.
Outlines daily, weekly, and periodic maintenance tasks to ensure optimal performance.
Specific daily cleaning and inspection procedures for the autoclave.
Specific weekly cleaning and descaling procedures for the autoclave.
Lists monthly and periodic checks, cleaning, and part replacements.
Solutions for when spore tests or indicator strips do not change color.
General| Brand | Tuttnauer |
|---|---|
| Model | 3140E |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
