Why is my Tuttnauer 3140E Laboratory Equipment leaking at the door?
If your Tuttnauer Laboratory Equipment is leaking at the door, ensure the door is tightened enough and the door gasket is sealing the chamber. If necessary, replace the door gasket.
Why are wraps burned after using Tuttnauer 3140E Laboratory Equipment?
To address wraps coming out burned from your Tuttnauer Laboratory Equipment, check if the water sensor is dirty. Also, verify that the wall outlet voltage is not too high and ensure items are not touching the chamber walls or bottom. Load the autoclave according to the instructions.
How to clean a very dirty Tuttnauer 3140E Laboratory Equipment chamber?
To clean a very dirty chamber in your Tuttnauer Laboratory Equipment, use Chamber Brite ™. Very dirty machines may require two cleanings.
Why does Tuttnauer 3140E take so long to heat up?
If your Tuttnauer Laboratory Equipment takes too long to heat up, clean the air jet and check for proper voltage at the wall outlet.
What to do if spore tests fail in Tuttnauer Laboratory Equipment?
If spore tests are failing or indicator strips are not turning in your Tuttnauer Laboratory Equipment, clean the air jet. Also, make sure the sterilization time and temperature are set correctly, and ensure the autoclave is not too heavily loaded.
Why does Tuttnauer 3140E Laboratory Equipment printer feed paper constantly?
If the printer on your Tuttnauer Laboratory Equipment gives paper feeds all the time when the machine is switched on, make sure the ‘feed button’ on the printer is not stuck.
How to troubleshoot Tuttnauer Laboratory Equipment machine not responding?
If your Tuttnauer Laboratory Equipment machine isn't responding, verify that the main switch is in the ‘On’ position, the power cord is properly connected to both the machine and the mains, and the circuit breaker hasn't tripped. Also, check the reset button on the cut-out thermostat.
What to do if Tuttnauer 3140E Laboratory Equipment process fails during heating stage with a HIGH TEMP message?
If your Tuttnauer Laboratory Equipment process fails while initiating the heating stage and displays a HIGH TEMP message, try changing the setting of the thermostat.
How to clean a very dirty chamber in my Tuttnauer 3140E?
If the chamber of your Tuttnauer Laboratory Equipment is very dirty, use Chamber Brite ™ to clean the autoclave; very dirty machines may require two cleanings.
What does ‘Low Heat’ mean on my Tuttnauer 3140E Laboratory Equipment?
If the message ‘Low Heat’ is displayed during heat up on your Tuttnauer Laboratory Equipment, it indicates a bad temperature sensor. If heating elements are remaining on instead of cycling on and off, call for a technician.
Details the manufacturer's warranty terms for components, labor, and chamber.
Procedures for activating the warranty and important statement of terms.
Provides detailed electrical specifications, including circuit breakers and fuses.
Specifies acceptable physical characteristics and contaminant levels for autoclave water.
Explains the meaning and function of various indicator lights on the control panel.
Details the program keys and other function keys on the control panel.
Description of the control panel screen layout and displayed information.
Lists and explains system messages and associated safety measures for user guidance.
Details sterilization parameters and operational sequence for unwrapped items.
Details sterilization parameters and operational sequence for wrapped items and porous loads.
Details sterilization parameters and operational sequence for glassware.
Guidance on electrical connections, safety, and initial setup for different models.
Instructions for setting up and verifying the automatic water filling system.
Guidelines for safely loading and unloading materials into the autoclave chamber.
Instructions on correctly filling the autoclave's water reservoir with distilled water.
Guidelines for cleaning, drying, and packaging items for effective sterilization.
Outlines daily, weekly, and periodic maintenance tasks to ensure optimal performance.
Specific daily cleaning and inspection procedures for the autoclave.
Specific weekly cleaning and descaling procedures for the autoclave.
Lists monthly and periodic checks, cleaning, and part replacements.
Solutions for when spore tests or indicator strips do not change color.
General| Brand | Tuttnauer |
|---|---|
| Model | 3140E |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
