To Next PageTo Next PageWhat to do if the display is not activated on my Tuttnauer Medical Equipment?
If the display is not activated, first verify that the main switch is in the ‘On’ position. Next, make sure the power cord is properly connected to both the machine and the power source. Finally, verify that there is electrical power in the main source.
Why is my Tuttnauer Medical Equipment printer not printing?
If the printer is not printing, ensure that the paper is correctly inserted into the printer. If that doesn't resolve the issue, try switching the machine off and then back on. If the printer then prints the date and time, the printer itself is working correctly.
General| Type | Tabletop Autoclave |
|---|---|
| Chamber Volume | 11 liters |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Sterilization Temperature Range | 121°C - 134°C (250°F - 273°F) |
| Chamber Material | Stainless Steel |
| Programs | Pre-set and customizable programs |
