05 MENU OPERATIONS
27
Multi Format LCD Monitor
[7] DISPLAY & SET
• System Default
- The user can use this function to initialize the
values of BRIGHT, CONTRAST, CHROMA, PHASE
and APERTURE of the monitor.
• Eco Saving
- This function is used to decrease the brightness
of the screen automatically to reduce the power
consumption when there is no signal.
- When the monitor receives the signal, the
brightness of the screen maintains the adjusted
level.
• User cong set
- This function saves 3 User congurations.
- Available mode is [User1], [User2], [User3].
- Marker, Center Marker, Safety Area, Marker Mat,
Marker Color in [Marker] menu and Brightness,
Contrast, Chroma, Phase, Aperture in [Picture]
are saved.
• OSD position
- This menu sets the position of the OSD menu.
- Available setting is [Center], [Right Top],
[Right Bottom], [Left Bottom], [Left Top].
• Key LED
- This function turns on and o the LED in front
of the monitor.
- Even though you turn o Key LED, when you
press LED button in front of the monitor, the
LED is on and after 5 seconds the LED is o.
• Firmware Version
- This item shows the current rmware version.
• Serial Number
- This item shows the serial number.
To Next Page
Loading...
Need help?
General
