38
Multi Format LCD Monitor
08 OTHER FUNCTIONS
[7] FOCUS ASSIST [8] RANGE ERROR
• Focus Assist function assigns a color to the
pixels in the shape or the boundary of the
image to inform the user to achive the best
focus.
- With this function, user can easily dierenciate
the focused area from the out-focused area
especially when shooting with a shallow depth
of eld.
- Available types are [Color On] and [Mono On].
* [Color On] : Background image is original color
type.
*
[Mono On] : Background image is mono type.
<FOCUS ASSIST - COLOR ON>
<FOCUS ASSIST - MONO ON>
• Pixels with Y’ or C’ levels exceeding the
designated levels adjusted in Y MAX, Y MIN,
C MAX and C MIN menu shall blink.
- After the input signal’s Luma(Y’) and chroma
information(C’) are analyzed, if the input signal
exceeds the designated maximum value or it is
below the minimum value, the pixels shall blink.
This function is to help the user to easily nd
out any unwanted levels of signals and set a
better exposure.
<RANGE ERROR - OFF>
<RANGE ERROR - ON>
To Next Page
Loading...
Need help?
General
