RUNNING-IN INFORMATION
The first 1000 km is a crucial part for the life of your TVS
JUPITER. Proper running-in operation during this period
helps in ensuring a maximum life and smooth performance
of your scooter.
The reliability and performance of your TVS JUPITER
depends on the special care and restraint exercised during
the running-in period. It is especially important that you
avoid operating the engine in a manner, which could expose
the engine parts to excessive stress. Maximum
recommended speed during the running-in is:
Maximum 50 kmph speed upto 1000 km (vary the
engine speed for better mating of parts).
The first service at 500 ~ 750 km is most important. During
running-in period all the engine components and other
parts will have set in. All adjustments to be restored, all
fasteners to be tightened. Engine cum transmission oil to be
replaced. Timely performance of the first service will ensure
optimum service life and performance from the engine.
NOTE
WARNING
CAUTION
Operating this vehicle safely is an important responsibility
of the rider. To help you make decisions about safety, we
have provided operating procedure and other information
in this manual. This information alerts you on potential
hazards that could hurt you or others. Since it is not possible
to warn you about all hazards associated with operating or
maintaining the vehicle, you must use your own judgement.
You will find important safety information in following form
with corresponding connotations in this manual:
Disregarding this message might result in injury to the rider.
This message indicates special procedures or precautions to be
followed to avoid damage to the vehicle.
This message provides further clarification for clearer
understanding of any particular information.
SAFETY INFORMATION
INFORMATION
7
INFORMATION
To Next Page
Loading...
Need help?
General
