40
Brake pad wear indicator
Visually check the brake pads wear. If the wear is
found beyond the wear indicator groove as shown in
the figure then, replace the brake pads.
BRAKES
Front brake (drum type)
1. Measure the free play of the front brake lever at
the lever end as shown in the figure.
2. The free play of the brake lever before the
engagement of brake should be between
15 ~ 20 mm.
Replace the brake pads as a set, if the wear limit indicator
shows beyond the wear limit.
Since the vehicle is fitted with Synchronised Braking
Technology (SBT) adjust the brakes with additional
care. If not it may result in brakes not working
properly.
15 ~ 20 mm
Contact TVS Motor Company Authorised Main Dealer
or Authorised Dealer, if found any slackness on the
SBT inner cable / hand lever or for any removal of
inner cable from the master cylinder.
To Next Page
Loading...
