TYAN S5515 - Security

http://www.tyan.com
70
3.6 Security
Aptio Setup Utility --- Copyright © 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Set Administrator Password Password Description
If ONLY the Administrator’s password is set, then this only
limits access to Setup and is only asked for when entering
Setup.
If ONLY the User’s password is set, then this is a power on
password and must be entered to boot or enter Setup. In
Setup the User will have Administrator rights.
The password length must be in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
→←: Select screen
↑↓: Select item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Administrator Password
Set administrator password in the Create New Password window. After you key in
the password, the Confirm New Password window will pop out to ask for
confirmation.
User Password
Set user password in the Create New Password window. After you key in the
password, the Confirm New Password window will pop out to ask for confirmation.