TYAN S5652 - Page 127

http://www.tyan.com
127
3.4.3.1 Uncore General Configuration
Uncore Status
Uncore Status Help
Link Speed Mode
Select the UPI link speed as either the POR speed (fast) default speed (slow)
Slow / Fast
Link Frequency Select
Allows for selecting the UPI Link frequency
12.8GT/s / 14.4 GT/s / 16.0 GT/s / Auto / Use Per Link Setting
Link L0p Enabled
Enabled – Set the c_10p_en,
Disabled – Reset it,
Auto – Auto decides based on Si Compatibility.
Disabled / Enabled / Auto
Link L1 Enabled
Enabled – Set the c_l1_en,
Disabled – Reset it,
Auto – Auto decides based on Si Compatibility.
Disabled / Enabled / Auto