TYAN S5652 - Page 165

http://www.tyan.com
165
3.6.2 BMC Network Configuration
Configure IPV4 Support
Management Port 1
Configuration Address Source
Select the configure LAN channel parameters statically or dynamically (by BIOS or
BMC). Unspecified option will not modify any BMC network parameters during BIOS
phase.
Unspecified / Static / DynamicBmcDhcp / DynamicBmcNonDhcp
Management Port 2
Enable/Disable BMC Share Nic.
Enabled / Disabled
Configure IPV6 Support
Server Management Port 1
IPV6 Support
Enable or Disable LAN1 IPV6 Support.
Enabled / Disabled