http://www.tyan.com
172
3.7.1 Secure Boot
Secure Boot
Secure boot feature is Active if Secure Boot is Enabled, Platform Key (PK) is
enrolled and System is in User mode. The mode change requires platform reset.
Disabled / Enabled
Secure Boot Mode
Secure Boot mode selector: Standard/Custom. In Custom mode Secure Boot
Variables can be configured without authentication.
Standard / Custom
NOTE: When Secure Boot Mode was set to [Custom], the following items will be
available to change.
Restore Factory Keys
Force System to User Mode. Install factory default Secure Boot Key databases
Reset To Setup Mode
Delete all Secure Boot Key databases from NVRAM
Key Management
Enables expert users to modify Secure Boot Policy variables without full authentication.
To Next Page
Loading...
