TYAN S5652 - Page 53

http://www.tyan.com
53
3.3.1 Network Stack Configuration
Network Stack
Enable/Disable UEFI Network Stack
Disabled / Enabled
NOTE: When Network Stack was set to Enabled, the following item will appear.
IPv4 PXE Support.
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not
be available.
Disabled / Enabled
IPv4 HTTPs Support
Enable/Disable IPv4 HTTPs boot support. If disabled, IPv4 HTTPS boot support will
not be available.
Disabled / Enabled
IPv6 PXE Support
Enable/Disable IPv6 HTTPs boot support. If disabled, IPv6 HTTPS boot support will
not be available.
Disabled / Enabled