TYAN S7002 - Page 70

http://www.TYAN.com
70
3.7.12 - On board Devices Configuration Sub-Menu
You can use this screen to view the Trusted Computing Configuration Menu.
Use the up and down arrow (/) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Trusted Computing
TCG/TPM Support
Execute TPM Command
Clearing the TPM
TPM Enable/Disable Status
TPM Owner Status
[No]
[Don’t Change]
[Press Enter]
[Disabled]
[Unowned]
Enable/Disable TPM
TCG (TPM 1.1/1.2) support
in BIOS
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option
Description
Trusted Computing
No
TCG/TPM Support
Yes
Enable/Disable TPM
TCG (TPM 1.1/1.2) support in
BIOS
NOTE: The items listed below will appear when TCG/TPM Support is set to [Yes].
Don’t Change
Disabled
Execute TPM Command
Enabled
Enable (Activate) / Disable
(Deactivate) command to TPM
Clearing the TPM
[Press Enter]
See dialog box
below
Select [OK] to clear the TPM or
[Cancel] to exit.
TPM Enable/Disable Status read only
Report TPM Enable/Disable
status
TPM Owner Status read only Report TPM Owner status