http://www.TYAN.com
71
3.7.13 - On board Devices Configuration Sub-Menu
You can use this screen to view the Onboard Devices Configuration Menu.
Use the up and down arrow (/) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Onboard Device and PCI Slots Configuration
Boots Graphic Adapter Priority
Lan1
Lan1 OP-ROM
Lan2
Lan2 OP-ROM
[Auto]
[Auto]
[Disabled]
[Auto]
[Disabled]
Select Remote Access
type.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Clearing the TPM is the process of returning the
TPM to factory defaults. It is possible the
platform owner will change when in this state.
Are you sure you want to clear it?
OK Cancel
To Next Page
Loading...
