Tyco TL880LE User Manual

Table of Contents
Warning: Installer Please Read Carefully 3
Introduction 5
Contact information 5
Features 6
Communicator ratings 6
Communicator compatibility 7
Installation requirements 7
Installation 8
Tools and supplies required 8
Step 1: Enable module 9
Step 2: Connect the TL880LE 10
1: Connect data bus 10
2: Connect power 10
3:Connect the PC-Link cable 10
4: Optional: Connect Ethernet 10
5: Optional: Connect remote external antennas 10
6: Power up 10
Step 3: Verify installer code to activate Alarm.com module 11
Step 4: Perform dual-path test (module registration) 11
Step 5: Allow module to auto-program 11
Panel settings 11
Central station and telephone line settings 11
Troubleshooting 15
Module status information 15
Troubleshooting LEDs 15
LED functions 16
LED details 16
LED L1 (red) 16
LED L2 (yellow) 17
LED L3 (yellow) 17
LED L4 (green) 17
LED L5 (yellow) 18
Various module states (modes) 18
Improving wireless signal strength 18
Walking the customer through new user setup on the web 19
Interactive Service Menu 19
Interactive menus 19
Installer programming 19
User functions 20
Limited Warranty 21
End User License Agreement 21
Regulatory information 23
- 2 -

Tyco TL880LE Specifications

General

Brand	Tyco
Model	TL880LE
Category	Controller
Language	English