WAIT - BUSY Door is busy and is not able to process cards.
Keypad Commands
RM Mode
Message
Graphic Description
CMD ISSUED The keypad command was accepted and processed.
CMD FAILED The keypad command was not implemented. Check
the Monitoring Station for the reason.
ENTER ACCESS This displays after entering a numeric keypad
command for which the Prompt 1 field is populated.
ENTER TARGET This displays after entering the numeric access code.
Escorted Visitor
RM Mode
Message
Graphic Description
ACKNOWLEDGED Card read acknowledged in a situation requiring
multiple cards for access.
Table 12:Message and Graphic descriptions (continued)
TST-100 Touchscreen Terminal Installation Guide 17
To Next Page
Loading...