TST-100 Touchscreen Terminal board
Figure 3 on Page 9 shows the TST-100 Touchscreen Terminal board switches, connectors, jumpers, ports, and LEDs.
Figure 3:TST-100 Touchscreen Terminal board
Switches
Table 5, Table 6, and Table 7 describe switches on the TST-100 Touchscreen Terminal board.
Switch Description
SW1 Reset
SW3 Reserved
S3 Termination resistor on the RS-485 for half duplex
S4 Termination resistor on the RS-485 for full duplex
Table 5:Switch descriptions
TST-100 Touchscreen Terminal Installation Guide 9
To Next Page
Loading...