Check whether the seat is properly locked in its position before driving the tractor.
Always use the seat belt when the ROPS is installed. Do not use the seat belt if a
foldable ROPS is down or there is no ROPS.
Check the seat belt regularly and replace if it is frayed or damaged.
Danger
Danger
16
► FOR SLIDING SEAT
■ Sliding Seat type
Slide the seat to the position you want. Release the lever.
Make sure the seat is locked in position.
NOTE: Do not use solvents to clean the seat.
Use warm water with a small amount of detergent added.
Before operating the tractor it is important to adjust the seat to the most comfortable position
and check whether it is properly locked in position.
Figure 1 identifies the seat fitted to your tractor.
* Sliding type
How to adjust the seat
To Next Page
Loading...
