► DIFFRENTIAL LOCK PEDAL
The Differential Lock Pedal is located below the
LHS of the Seat.
In case of wheel slippage use the diff-lock
by pushing down on the diff lock pedal.
To release it, remove the foot from the pedal.
SUB GEAR LEVER
(RANGE SHIFT LEVER)
► SUB GEAR LEVER (RANGE SHIFT LEVER)
The range shift lever provides two speed ranges L and H.
The tractor should be stopped and clutch depressed before changing speed ranges.
Choose L, M speed range on range shift lever to match work application.
Avoid damage!
Select the proper speed range and gear for the mob.
● The machine maybe operated in any gear with engine speeds at 1350-3000rpm.
Within these limits, the engine can be placed under varying load operations.
● Never overload the engine by lugging machine at low idle speeds.
● Raise the engine speed to match expected loads. If a slight increase in engine rpm
occurs
Simultaneously while moving the hand throttle lever forward, the engine is not
overloaded.
Important
42
SUB GEAR LEVER
DIFFERENTIAL LOCK PEDAL
To Next Page
Loading...
