TYM T254NC - PTO Operation; PTO Monitor Lamp; PTO ON;OFF Switch

PTO monitor Lamp
■ THE PTO MONITOR LAMP
On the dash panel indicates the state of the PTO shaft.
1. If the monitor glows: The PTO is rotating.
2. If the monitor is off: The PTO is off.
38
The PTO shaft will not rotate if switch is in OFF position.
■ PTO ON/OFF SWITCH
PTO ON/OFF switch is situated on the right hand side on the instrument panel and can
be identified easily with its built in yellow colored indicator.
When the switch is pushed down to start the PTO, the indicator will glow, indicating
that the switch and the PTO are ON.
If the switch is pushed down and turn counter clock wise, the indicator will go off,
signaling that the PTO is OFF.
PTO LAMP
PTO ON/OFF S/W