E) Engine system
1) Always use the recommended grade of oil. (API CD:CE)
2) Every day before starting the engine, check the oil level with a dipstick & refill it so that the level of
oil sits between minimum and maximum levels.
3) Change the engine oil, replace the filter and “O” ring as and when required.
F) Cooling system
1) Check the fan belt tension regularly and if required.
2) Check the coolant level in the radiator fins and make sure that it is always clean.
3) Replace the radiator cap with a genuine cap, only if required.
4) Do not remove the thermostat, but replace it with a new one if required.
5) Do not change the radiator water often.
Note:
1) Always stop any fuel or oil leakages.
2) Carry out the regular maintenance failure to do so might increase the fuel consumption by 25%.
3) Carry out the torque of cylinder head bolt and adjustment of valve clearance regularly.
Consult your dealer about this issue.
4) Check the tire pressure and inflate the tires as recommended.
5) Always buy genuine spares from the authorized dealer/distributor.
6) Always carry out the service of the tractor by your authorized dealer/distributor.
For any other information, contact your nearest Authorized dealer/distributor.
80
To Next Page
Loading...
