14)
Dual Watch/Monitor (DW—MENU 15)
Functions:
Dual Watch feature makes TH-UVF9 can monitor the calling signal when FM
radio is on and you won't miss any calling.
Enter
Menu
15'" to set DW. Default: OFF.
15)
Receive Saver (RX.SAV—MENU 16)
Functions:
this feature significantly reduces quiescent battery drain, and you may not
receive the full data burst.
Enter
Menu
16'" to set
RX.SAV.
Default: OFF.
16)
Auto Keypad Lock (AUTOLK—MENU 18)
Functions:
in order to prevent accidental frequency change or inadvertent transmission,
various aspects of the TH-F8's keys and switches may be locked out.
Enter
Menu
18'" to set
AUTOLK.
Default: OFF.
When you switch AUTOLK ON, the keypad will be locked automatically if there is no key
operation for 5 second.
If the radio is locked, press [E» ] key to unlock it. Also you can lock it using [OB ] key
by manual.
17)
Voice Prompt (VOICE—MENU 19)
Functions:
enable/disable voice prompt.
Enter
Menu
19'" to set
VOICE.
Default: ON.
18)
Power-on Display setting (OPN.SET&VLT&PON.MSG—MENU 20&21&22)
Functions:
choose power-on display mode and edit power-on message
Enter
Menu
20'" to set
OPN.SET.
Default: OFF.
OFF:
display model version
DC:
battery power voltage
MSG:
power-on message
Enter
Menu
21" to
check
battery
voltage.
Enter
Menu
22"" to
edit
power-on
message,
also
you can
edit
it directly by
program software.
Using [ D ] / [ a] to select character; [ CSS ] / [ t3B ] to switch cursor position.
19)
Repeater Shift setting (OFFSET&S-D—MENU 23&28)
Functions:
repeater stations, usually located on mountaintops or other high locations,
provide a dramatic extension of the communication range for low-powered
hand-held or mobile transceivers.
Under VFO mode, you can set the magnitude and direction of the repeater shift.
Enter
Menu
23'" to set magnitude of the repeater shift.
Available values: 0.00 ~ 99.95 MHz
Enter
Menu
28'" to set the repeater shift direction. Default: OFF.
To Next Page
Loading...
