TYT TH-UVF 9 - SET MENU MODE

5) MENU Mode
Press [ B ] key to enter MENU mode, ttiere are 34 items in total. Please see SET
MENU MODE. Page 21
6) Reset Mode
Press [ B ] key and switch the power on to enter Reset mode, then press [ B ] key
to enter.
1. [ D ] or [ a] key to select VFO/FULL.
2. VFO: initialize all setting under frequency mode.
3. FULL: initialize all setting under frequency and memory mode.
20!
SET MENU MODE
No.
LCD Display
Available Values Description of Function
01 SCAN
/
Frequency/Channel Scan
02 TX.SEL EDIT/BUSY Priority Transmit
03 VOX 1-8
VOX Level Setting
04 POWER LOW/HIGH High/Low TX Power
05 SQL 0-9 SQL level setting
06 D.WAIT ON / OFF Dual Wait/Standby
07 LED ON / AUTO / OFF LED Display mode
08
LIGHT C0L0R1/C0L0R2/COLORS Backlight brightness setting
09 BEEP ON/OFF
Keypad Beeper Setting
10 ANI ON/OFF
Automatic Number Identity
11 TOT OFF/30/60/.../270
Transmitter Time-Out Timer
12
BCLO
OFF / WAVE / CALL Busy Channel Lock-Out
13 VOX.SW ON/OFF
VOX Switch ON/OFF
14 ROGER ON/OFF
Transmit Over Beeper
15
DW
ON / OFF
Dual Watch/Monitor
.1121