code,
the radio will enter the remote stun status and you will hear a sound. And
then press [PTT] and input DTMF code 12345678#, the radio will quit the remote
stun status and enter normal operation. The operation of remote kill is the same to
remote stun, but in this situation, radio cannot be revived by this way.
3)
5T&2T Version
A. Click in sequence "program -> Optional Features - Optional Signal - 5-Tone - Remote
kill/stun code" to input your desired Remote kill/stun code, the fixed one is 7 characters.
B. press [ Q ], LCD displays ' ', input the code directly and then press [PTT] to
transmit.
e.g.:
the Remote stun code for radio A is 1234567, revive code is 2345678, remote kill
one is
7654321.
If you want to remote stun it, please use another one, radio B to
input the working frequency of radio A, then press [ Q ], LCD displays "—input
in sequence 1234567, then press [PTT] to transmit. After receiving this code, the
radio A will enter the remote stun status and you will hear a sound. If you want to
revive it, press [ ] and input remote un-stun code 2345678, the radio will quit the
remote stun status and enter normal operation. The operation of remote kill is the
same to remote stun.
To Next Page
Loading...
Need help?
General
