ZED-F9T-Integration Manual
1 Integration manual structure
This document provides a wealth of information to enable a successful design with the ZED-F9T
module. The manual is structured according to system, software and hardware aspects.
The first section, "System description" outlines the basics of the ZED-F9T timing receiver.
The following section "Receiver functionality" provides an exhaustive description of the receiver's
functionality. Beginning with the new configuration concept both existing and new users should read
this section to understand the new messages employed. Most of the following sub-sections should
be familiar to existing users of u-blox positioning products, however some changes are introduced
owing to the new configuration concept.
The sections from "Design" onwards addresses hardware options when designing the ZED-F9T
into a new product. This part gives power supply recommendations and provides guidance for
circuit design and PCB lay-out assistance. An antenna section provides design information and
recommendation for this important component. A final "Design guidance" section helps the
designer to check that crucial aspects of the design-in process have been carried out.
The final section addresses the major product handling concerns giving guidance on ESD
precautions, production soldering considerations and module delivery tape and reel information.
UBX-19005590 - R01
1 Integration
manual structure
Page 6 of 80
Advance Information
To Next Page
Loading...
Need help?
General
