U-Line CLR60 User Manual

3. Check the levelness after each adjustment and repeat the previous
steps until the unit is level.
GRILLE INSTALLATION
1. With a standard blade screwdriver (or 1/4" nutdriver), remove
the screw needed to attach the grille (see Figure 12).
2. Carefully remove the grille, which is packaged inside of the unit. A
small screw hole is located toward the top of the middle recessed
section of the grille.
Figure 12
UL206
GRILLE SCREW
13
UL215
Figure 10
UL205
TURN FOOT TO ADJUST
Figure 11

U-Line CLR60 Specifications

General

Brand	U-Line
Model	CLR60
Category	Ice Maker
Language	English