8. Remove pivot screw from
top hinge, invert screw and
reinstall pivot screw in top
hinge (see Figure 20).
9. Remove three plastic plugs
in hinge holes, top of cabinet,
opposite side. Be careful not
to scratch cabinet (see
Figure 21).
10. Invert and install upper hinge
on door.
16
User’s Manual
Figure 22
11. Fasten upper hinge to unit
(3 screws). Partially tighten
screws until door is aligned
(see Figure 22).
12. Adjust door to assure proper
seal. Tighten upper hinge
screws securely.
To Next Page
Loading...
Need help?
General