Ubee EVW32C User Manual

Ubee Interactive Using the Advanced Option
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017 63
3. Click Apply. The triggering rule is created and displayed in the table as shown below.
Additional field descriptions follow.
The following example shows the Port Triggering option set up for a dual Xbox
configuration.
Label Description
Trigger Start Port Allows you to enter a port number or the starting port number in a range of port numbers.
Trigger End Port Allows you to enter a port number or the ending port number in a range of port numbers.
Target Start Port Allows you to enter a port number or the starting port number in a range of port numbers.
Target End Port Allows you to enter a port number or the ending port number in a range of port numbers.
Protocol Allows you to enter the protocol type for this rule: UDP, TCP, or BOTH.
Description Allows you to enter a name for the triggering rule.
Enabled Disables (Off) or enables (On) the triggering rule.
Apply Saves changes.
Remove All Deletes all entries in the forwarding table.

Ubee EVW32C Specifications

General

Model	EVW32C
Category	Gateway
Frequency Band	2.4GHz and 5GHz
Ethernet Ports	4
USB Ports	1
Voice Ports	2
DOCSIS	3.0
Wireless Standard	802.11n
Security Features	WPA, WPA2
Type	Cable Gateway