36
Chapter 10: Access Point DetailsUniFi
™
AP-PRO and AP-AC User Guide
Ubiquiti Networks, Inc.
Radio (11n/b/g) or Radio (11n/a)
Click Radio (11n/b/g) or Radio (11n/a) to display the
channel and transmit/receive statistics.
Channel Displays the wireless channel being used.
Transmit Power Displays the EIRP in dBm.
Note: If the device has an external antenna, you can
place the mouse over the icon for additional details.
TX Pkts / Bytes Displays the number of packets and total
bytes transmitted by the Access Point.
RX Pkts / Bytes Displays the number of packets and total
bytes received by the Access Point.
TX Retry / Dropped Displays the percentage of
transmitted packets that needed to be resent and the
percentage of packets that were dropped.
RX Error / Dropped Displays the percentage of packets
received that needed to be resent and the percentage of
packets that were dropped.
# Users Displays the number of users connected to the
primary network.
# Guests Displays the number of users connected to the
guest network.
Users
Name Displays the name (MAC address if not defined) of
users connected to the primary network of the selected
Access Point. You can click the links under Name to display
additional details of each user (see “User/Guest Details”
on page 44 for more information).
WLAN Displays the name of the SSID (network name) of
the wireless LAN (WLAN) that the user is connected to.
Actions Select from one of the following actions:
•
Block Click this button to block a specific user from
accessing the Access Point. This will add the client to the
Blocked Device list.
•
Reconnect Click this button to reconnect a specific user
to the Access Point.