Ublox ODIN-W2 Series - Flashing the u-blox Bootloader; Bootloader Flashing via ROM; Bootloader Flashing via SWD;JTAG; Flashing Arm Mbed Applications

ODIN-W2 series - Getting Started
UBX-15017452 - R02 Advance Information Use case examples
Page 21 of 27
• Wi-Fi setup
o AT+UWSCA=0,4
 Deactivate network id 0
o AT+UWSC=0,0,1
 Active on startup
o AT+UWSC=0,2,"my Phone"
 Set the Network SSID to connected to
o AT+UWSC=0,5,2
 Use WPA2 as authentication type
o AT+UWSC=0,8,"my password"
 The secret WPA2 Password
o AT+UWSCA=0,3
 Activate Wi-Fi configuration
 ODIN-W2 will now try connect immediately
• Wait for the Wi-Fi link and network to go up
o +UUWLE:0,F2A637C90E9E,11
 Mac address received and connected on Channel 11
o +UUNU:0
 Network is up, it is now possible to read the IP Address
• Read IP address and gateway
o AT+UNSTAT=0,101
o +UNSTAT:0,101,172.20.10.2
 ODIN has got the IP Address 172.20.10.2
o AT+UNSTAT=0,103
o +UNSTAT:0,103,172.20.10.1
 the gateway on IP Address 172.20.10.1
Now start an app on the phone like a console program. Sample apps that work well are “TCP console” for iOS
and “TCP UDP Terminal” for Android, which supports both TCP client and server. Start a TCP Server on port
5003 on the phone.