Ublox ODIN-W2 Series Getting Started

ODIN-W2 series - Getting Started
UBX-15017452 - R02 Advance Information Wi-Fi network setup
Page 9 of 27
3 Wi-Fi network setup
To use TCP and UDP peers, at least one Wi-Fi network must be defined (and connected). This is done using the
AT+UWSC and AT+UWSCA commands. To define a network, IP address assignment behavior must be defined.
Default behavior is DHCP client.

Ublox ODIN-W2 Series Specifications

General

Brand	Ublox
Model	ODIN-W2 Series
Category	Control Unit
Language	English