Ublox ODIN-W2 Series Getting Started

ODIN-W2 series - Getting Started
UBX-15017452 - R02 Advance Information Introduction
Page 5 of 27
1 Introduction
The ODIN-W2 series is a highly integrated multiradio module developed by u-blox for integration in demanding,
reliable devices such as those needed for industrial and medical applications. The module is built around a
multiradio chip, which includes Wi-Fi, Classic Bluetooth and Bluetooth Low Energy (Dual Mode / Bluetooth Smart
Ready). This document describes how to set up and use the ODIN-W2 series modules.
1.1 Key features
One of key features of the ODIN-W2 series is the Wireless serial cable replacement functionality. The basic
functionality is to transfer data between the serial port and a wireless link. It is possible to configure the ODIN-
W2 series module to automatically setup a connection and/or accept an incoming connection using AT
commands.
For a host, this means that an existing serial cable can be replaced by a wireless solution; in many cases without
the need to modify the host.
Figure 1: ODIN-W2 series Bluetooth setup

Ublox ODIN-W2 Series Specifications

General

Brand	Ublox
Model	ODIN-W2 Series
Category	Control Unit
Language	English