• Set Time Minutes
This feature will allow you to adjust the minutes. The
“Sync time with GPS” button on the touchscreen must be
unchecked. To make your selection, press the “+” or “–”
buttons on the touchscreen to adjust the minutes up or
down.
• Time Format
This feature will allow you to select the time format
display setting. Press the “Time Format” button on the
touchscreen until a check-mark appears next to the 12hrs
or 24hrs setting, showing that setting has been selected.
• Show Time In Status Bar — If Equipped
This feature will allow you to turn on or shut off the
digital clock in the status bar. To change the Show Time
Status setting press the “Show Time in Status Bar” button
on the touchscreen until a check-mark appears next to
setting, indicating that the setting has been selected.
• Set Date In Cluster — If Equipped
This feature will allow you to manually set the date in the
cluster, select from the following fields:
• Set Date Day — Press the “+” or “–” buttons on the
touchscreen to adjust the Days up or down
• Set Date Month — Press the “+” or “–” buttons on
the touchscreen to adjust the Months up or down
• Set Date Year — Press the “+” or “–” buttons on the
touchscreen to adjust the Years up or down
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button
on the touchscreen the following settings will be avail-
able:
• Forward Collision Warning — If Equipped
The Front Collision Warning (FCW) feature provides an
audible and/or visual warning to potential forward
collisions. The feature can be can be set to Far, or set to
226 UCONNECT SETTINGS
To Next Page
Loading...
Need help?
General
