2. If you have more than one vehicle registered into the
Mopar Owner Connect website
(
moparownerconnect.com
), select the vehicle you
want to send the command by clicking on its image
along the top.
3. Beneath the image of a vehicle like yours, you will see
a row of icons. To turn on the horn and lights, press the
“trumpet icon.” To turn off the horn and lights, press
the “trumpet icon” again.
NOTE: A quicker way to turn off your Remote Horn and
Lights would be to push the “Panic” button on your Key
Fob if you are near the vehicle.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when
your registered your Uconnect Access system). Please
enter your Uconnect Security PIN.
5. A message will appear on the screen to let you know
if the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle,
contact Uconnect Care by calling: 855-792-4241
NOTE: The Uconnect Care agents are trained to help you
with unlocking of your door (for example, in an acciden-
tal lock-out). All other Remote Services should be per-
formed via the Mopar Owner Connect website
(
moparownerconnect.com
) or through the Uconnect Ac-
cess App on your compatible device.
2. For security purposes, the Uconnect Care agent will
verify your identity by asking for your 4-digit
Uconnect Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
3
ALL ABOUT UCONNECT ACCESS 69
To Next Page
Loading...
Need help?
General
